26
Avanti Attendant console
Phone Book list you want to access.
3. Press
{SHOW LIST}
.
4. Use the [LO HI] button to scroll through the list or use
the dial pad to enter appropriate characters until the
name appears on the display.
5. Press the softkey on the right side of the appropriate
name, under
<DIAL>
.
The Phone Book feature automatically dials the number.
If you want to see details of the entry before dialing the
number, press the softkey on the right side of the appropri-
ate name, under
<DETAILS>
. The display shows the name
for the entry, the number of the speed dial bin where the
entry is stored, and the telephone number for the entry.
You can then press
{DIAL}
to dial the number,
{UPDATE}
to change the name or number for the entry, or
{REMOVE}
to remove the entry from the Phone Book.
To program your private Phone Book list
For each entry in your private Phone Book list, you enter
both a name and a telephone number.
1. Press
,
when the telephone is idle.
2. Press
{PRIVATE}
.
3. Press
{ADD NEW}
.
4. Enter the characters in the name (up to 16) by using the
dialpad.
The table at the end of this section shows the dialpad
equivalents of each character.
5. Press
{NUMBER}
.
6. Enter up to 16 digits for the telephone number.
7. Press [HOLD] to save and continue programming
numbers, or skip to next step.
The previous display returns so that you may make the
next entry, in the next available speed dial bin.
8. Press
{SAVE&EXIT}
when you have finished program-
ming all the entries for the list.
Atc_txt.book Page 26 Wednesday, August 4, 1999 11:56 AM
