24
Avanti Attendant console
ABBREVIATED DIALING
PROGRAMMING
SPEED DIAL
You may program SPEED DIAL buttons or SPEED DIAL
bin codes to enable you to dial outside numbers quickly.
NOTE
Pauses may be entered, where needed, in a speed
dial sequence by pressing
the pause icon
.
To program a speed dial bin code or button
1. Press
.
2. Do one of the following:
Press
{SPEED DIAL}
and dial a speed dial bin code
(three digits, e.g. 003). See your System Administrator
for a list of code numbers.
or
Press the SPEED DIAL button to be programmed.
The number previously entered is displayed.
3. Dial an outside line access code followed by the num-
ber you want to store.
4. Press
.
MEMORY BUTTONS
Memory buttons are used for one-press dialing of exten-
sions and feature access codes6.
To program a MEMORY button
1. Press
.
2. Press the MEMORY button to be programmed.
The number previously programmed is displayed.
3. Dial the desired extension number or feature access
code (up to four digits, not including the FEATURE
code).
See the Feature codes table at the end of this guide.
4. Press
.
Atc_txt.book Page 24 Wednesday, August 4, 1999 11:56 AM
