8
Avanti Attendant console
Dialing on the console
If you are connected to an outside line and [DIAL CONT]
indicator is on, any digits you press are dialed on the out-
side line.
If the [DIAL CONT] indicator is off, any digits you press are
considered the beginning of a transfer process.
When dialing internally or when dialing a system feature,
the [DIAL CONT] indicator should be off.
You need to use [DIAL CONT] when dialing to Voice Store
& Forward machines, SPRINT, MCI lines, etc.
SETTING VOLUME AND DISPLAY CONTRAST
To adjust the handset volume
During a conversation:
•
Press [LO HI] to change the volume.
To adjust the volume of tones
While connected to the tone:
•
Press [LO HI] to change the volume.
To adjust the display contrast
While the console is in idle state:
•
Press [LO HI] to change the display contrast.
MUTE RING
The arrival of a new call is announced by a ring burst. Also,
a call waiting tone is sounded, at preset intervals, when
calls are waiting in queues. You may disable these tones.
To disable ringing
•
Press [MUTE RING].
The [MUTE RING] indicator lights.
To enable ringing
•
Press [MUTE RING] again.
The [MUTE RING] indicator goes out.
Atc_txt.book Page 8 Wednesday, August 4, 1999 11:56 AM
