Telpar, Inc. MTP Series Receipt Thermal Printer User Manual
2011 Telpar, Inc. (Rev.20110809)
Page 24
4.2.2.2
Set Print Mode
ESC !
+n
[1B 21
+n
]
+n
is defined as
Bit
Function
7
Not used.
6
Not used.
5
0 = Double high print OFF.
1 = Double high print ON.
4
0 = Double wide print OFF
1 = Double wide print ON.
3
Not used.
2
Not used.
1
Font size.
0
Font size.
Set Print Mode Table
Bit 1
Bit 0
Font size (WxH)
0
0
FontB (10x30)
0
1
FontA (12x30)
Table 1 - Set Print Mode Table
Both double wide and double high can be selected for either character size. When a printed line
contains characters with different heights, the characters are arranged so that the baseline of all
characters lines up. Default = 00hex (Font B, 10 x 30 matrix) for MTP-2222. Default = 01hex (Font A,
12 x 30 matrix) for MTP-2232 and MTP-2242
4.2.2.3
Printer Reset
ESC @
[1B 40]
Initializes the printer.
Any data received before the ESC @ but not yet printed is cleared. The character size is set to the
default font. Left and Right Margins are set to the defaults. Reverse video is turned off. Underline
printing is turned off. Bar code height is set to 64. Bar code magnification is set to 2.
4.2.2.4
Telpar's Window Commands.
The Begin Document (US b) and End Document (US e) commands were created for use by the Telpar
Windows driver. These two commands should not be sent to the printer by any other application
program since unexpected results will occur.
