SAFETY NOTIFICATION |
81
Safety Notification
This symbol, wherever it appears, alerts you to the presence of
uninsulated, dangerous voltage levels inside the enclosure –
voltage which may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating
and maintenance instructions. Read the manual.
1.
Read All Instructions.
All safety and operating instructions must be read before operating the product.
2.
Retain All Instructions.
All safety and operating instructions must be maintained for future reference.
3.
Heed All Warnings.
All warnings on the product and those listed in the operating instructions must be adhered to.
4.
Follow All Instructions.
All operating and product usage instructions must be followed.
If the equipment is used in a
manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
5.
Heat.
This product must be situated away from any heat sources such as radiators, heat registers, stoves, or other
products (including power amplifiers) that produce heat.
6.
Water and Moisture.
Do not use this product near water.
7.
Attachments.
Do not use any attachments not recommended by the product manufacturer as they may cause
hazards.
8.
Power Sources.
This product must be operated from the type of power source indicated on the marking label and
the installation instructions. If you are not sure of the type of power supplied to your facility, consult your local
power company.
9.
Grounding and Polarization.
This product is equipped with a polarized AC plug with integral safety ground pin. Do
not defeat the safety ground in any manner.
10.
Power Cord Protection.
Power supply cords must be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to the cords at AC wall plugs and convenience recepta-
cles, and at the point where the cord plugs into the product.
11.
Lightning.
For added protection during a lighting storm, or when the unit is left unattended or unused for long
periods of time, unplug the unit from the AC wall outlet. This will prevent damage to the product due to lightning
and power surges.
12.
Overloading.
Do not overload AC wall outlets, extension cords, or integral convenience outlets as this can result in a
fire or electric shock hazard.
