Telos Vset, Installation & User Manual

Page: 24 / 32

Chapter 4 |
16
Menu Button
User Preferences Menu
Within this menu you will find parameters that dictate how the VSet and the connected talkshow
system will operate.
Auto Hold
This menu item enables or disables the Auto Hold function for the studio. When enabled, a call will
automatically be answered and placed on hold by the talkshow system. When a call comes in, the
caller will hear POH until the call is picked up. When Auto Hold is disabled, the incoming call will
ring in as usual. This is a global setting and all connected VSet Phone Sets will display a small letter
“H” in the upper right hand corner of the screen when Auto Hold is enabled.
Lockless Mode
This feature turns off the Call Lock function to allow the VSet’s On-Air Line Buttons to operate more
like an office phone. With this function enabled, you will be able to seize
and drop calls from the
Line Buttons instead of using the Drop button.
BEWARE: With Lockless Mode DISABLED, an on-air call is locked with the second push of the
Line Button. With Lockless Mode ENABLED, an on-air call will be dropped with the second
push of the Line Button. So if you have On-Airs who are used to office phones, use this
feature. If you have On-Airs who are used to the previous Telos Phone Systems, do not use
this feature. You have been warned!
Auto Dial Timeout
Use this menu item to control how long of a delay is desired before executing a call after the last digit is dialed. Remember that
the Vx uses the SIP standard ENBLOC dialing plan which requires the push of a send button. On this controller, the pound (#)
key is used as the “send” button. This timeout will allow the user to dial using the old POTS method and the send command
will be executed after this amount of time.