Telos Vset, Installation & User Manual

Page: 23 / 32

Chapter 4 |
15
Menu Button
Engine Setup Menu
Here is where you will find all of the settings regarding the Telos system to which you want the VSet to communicate. After
initial setup, there will be very few adjustments you may need to make to these settings.
Engine IP
Use this input field to tell the VSet with which Telos system to connect. If there are multiple
Talkshow Systems on the network (Nx 6/12, iQ6, Hx6, or Vx Engine), you can manually dial the IP
address for the system you want into this field. Once the IP is entered, press the line key to the left of
Engine IP to accept the IP. If the line key is not pressed, the IP will revert to the previous entry when
the next field is selected.
Vx Engine List
If you just can’t remember the IP addresses of all the Talkshow Systems on your network, not to
worry. When this menu item is selected, the VSet will display all of the compatible Talkshow
Systems that are available on the network with their IP addresses. Select a system by using the soft
keys or by pressing the line button to the left of the system to which you wish to connect.
User and Password
The VSet needs to log itself into the system in order to communicate. In these two fields you will
enter the user name and password for the Talkshow System to which you want the VSet to connect.
The factory default username is:
user and there is no password, so leave the password field blank. To
change the user name and password, please refer to the manual for the Talkshow System with which
you are working.
Select Studio
Use this item to select the Studio for the VSet. Hx6 and iQ6 is only capable of handling one Studio.
In this case, the studio is
Hybrid 1&2
. For info on setting up a Studio in Vx, please refer to the Vx
Engine Manual.