background image

V1.1-OCTOBER 2019 | 

X

OMNIA MPX NODE MANUAL

By Web

The Omnia Web site has a variety of information that may be useful for product selection 
and support. The URL is 

TelosAlliance.com/Omnia

 .

Service

You must contact Telos Alliance before returning any equipment for factory service. We 
will need your unit’s serial number, located on the back of the unit. We will issue a return 
authorization number, which must be written on the exterior of your shipping container. 
Please do not include cables or accessories unless specifically requested by the Technical 
Support Engineer. Be sure to adequately insure your shipment for its replacement value. 
Packages without proper authorization may be refused. US customers, please contact 
Telos Alliance Technical Support at +1-216-622-0247. All other customers should contact 
local representative to make arrangements for service.

Warranty

For the latest Telos Alliance warranty, visit: 

telosalliance.com/warranty

Register your product

Register your product today to get the full benefits of our warranty, support, and product 
updates

telosalliance.com/product-registration/

The Telos Alliance

1241 Superior Ave. Cleveland, OH 44114 USA

+1 (216) 241-7225 

For Telos Support:

24/7 telephone:  

+1 (216) 622-0247

Email: 

 

[email protected]

Web: 

 

telosalliance.com/support-request

Summary of Contents for Omnia 2001-00522-000



































































Reviews: