Camera installation
1. Clean the front windshield with a cloth (figure 1).
2. Tear the 3M adhesive protective tape on the bracket (as
shown in figure 2).
3. Connect the car charger to the cigarette lighting port (as
shown in figure 3).
4. Stick the bracket with the sticker removed on the wind-
shield of the car (figure 4).
5. Tear off the protective film on the display screen of the
recorder.
6. The recorder bracket is connected to the host by a
magnet.
7. Connect the USB terminal of the car charger with the USB
terminal of the recorder.
8. Tear off the protective film on the lens.
Note:
you can adjust the video angle according to your pref-
erences.
Change the bracket’s position (45°) to adjust the video angle
of the front lens (suggestion: the front part of the lower
picture accounts for 1/3 of the picture, and the sky point of
the upper picture accounts for 1/3).
Warning:
While driving, for your safety and your passengers’
safety, please keep your eyes on the road, not on the display
of the recorder.
