2. Parking monitoring function
After the parking monitoring is activated, when the vehicle is
turned off and the recorder automatically enters the shut-
down program, if it detects a vibration generated by external
forces, the dash cam will automatically start up and record,
then automatically shuts down after 20 seconds. When the
vibration is detected again, the camera function is activated
again.
Note:
To set up the parking monitoring function, you must
connect the recorder to the power supply and allow the
recording to automatically start. After you set up the parking
monitoring, this function can be activated only after the
power is off and the recorder automatically shut down.
3. Motion detection function
When the motion detection is turned on, the camera will start
recording when an object is detected to be moving. The
motion detection starts in 10 seconds. The second detection
will continue to record in 10 seconds. When you detect an
object moving again, start the camera again!
4. USB mode
Connect the USB cable to the computer, the auto data record-
er will automatically pop up the USB menu, and the following
options will appear:
1.Storage 2. PC Cam
Video or photo files that are stored on the microSD card can
be accessed in this mode.
Select this mode and the USB video device will pop up. It can
take photos or video in real time, so you can use it as a PC
camera.
