11. Icon of battery power and status. Displays the current
state - connected to car charger. Displays current battery.
12. GPS status icon (only available for DC2). After inserting
the GPS module into the recorder, the speed will be displayed
after searching the signal.
13. [ 00
：
00
：
05] Time. Displays the current standard time.
Please initialize it before use.
14. [2018/01/01] Date. Displays the current standard date.
Please set it before use.
15. [0 km/h] Current speed (only available for DC2). After the
camera searches for GPS signal, the current speed is displayed.
Setting the Time and Date:
1. Since the camera automatically starts recording when you
start up the car, first you have to press [OK] to pause the
recording. The recorder will enter standby state.
2. Then press to pop up the menu, and then press again.
Select Date/Time by pressing down or up, then press [OK]
to enter the Settings.
3. Adjust the value by pressing or keys, select the value,
then press [OK] to confirm the selection and enter the next
field. Press to exit after you finished setting up the date and
time.
Taking a photo with the recorder
When the recorder is in standby mode, press [M] once to
switch to the camera mode. Press [OK] to take a picture. When
taking a picture, the screen flashes once, indicating that the
picture is taken.
