12.5
OIL LEVEL INSPECTION.
The oil level must be checked monthly. If necessary, add oil of the same type.
12.6
OIL FILTER.
The oil filter must be changed once a year.
12.7
HYDRAULIC CYLINDERS.
Make sure that all hydraulic cylinders are closed when storing the machine.
12.8
QUICK COUPLERS.
Be painstaking by keeping the quick couplers clean and apply the dust caps after use.
12.9
NYLON RAILS.
The nylon rails on the telescope frame have to be cleaned and lubricated with oil.
DO NOT USE
GREASE!
Soil and sand will easily stick to the grease, and then wear out the nylon rail much faster.
Underneath the telescope frame there is a roller that must be greased regularly.
12.10
SKIDDING RINGS.
Skidding rings and brushes for the emergency stop* have to be cleaned up regularly. Use alcohol
or electric contact spray. If necessary, rub off the rings with a fine rubbing paper. (See also chapter
5.7).
12.11
STORAGE.
The machine should be parked on a dry place during the closed season.
12.12
CLEANING.
The machine should be cleaned and oiled regularly and by the end of the wrapping season.
NOTE !
When using high pressure washing apparatus, care must be taken with the electrical
installation.
Also make sure that water is not sprayed directly into the bearings, etc..
Keep the control box protected from rain and water. If necessary use compressed air to dry
electrical components.
12.13
STORAGE.
The machine should be parked on a dry place during the closed season.
* Emergency stop: see chapter 2.1
31
