ONT248 Description, Installation and Turnup Manual
Page 13 of 29
·
Network Access Control (NAC) with Dynamic VLAN and Guest VLAN
·
Upstream broadcast rate limiting and filtering for security control
ONT248 Connectors
The front of the ONT248 has the following connectors:
·
GE1 - GE48
– 1000BT Gigabit Ethernet ports (fortyeight) supporting Power over
Ethernet (PoE) devices. These are standard RJ45 Ethernet port jacks..
·
PON Connector
- This is a standard Optical ONT connector to the Optical Line
Terminal (OLT) upstream via a fiber-optic cable. It is a standard SC/APC-type
connector for Single-Mode Fiber (SMF) cable. The connector is shipped with a
small fiber plug to protect the PON optical connector from dust and
contaminants.
·
Reset
- A small recessed reset button can be utilized to reset the ONT.
The ONT248 has the following rear connectors:
