ONT180C Installation and Turnup Guide
Page 36 of 38
All ONTs that have not been accepted onto the PON will be shown in the dialog and
each can be configured and accepted onto the PON. The following editable fields are
present:
·
Configure (Y/N):
Whether or not to configure the ONT. Selecting N will ignore
that ONT and will leave it in the unconfigured state. If the EMS has already put N
in this field it is typically because the ONT already exists on the system and
needs to be deleted from its previous location.
·
ONT ID:
An unused ONT ID is suggested and can be overridden if desire with
any available ID.
·
User Label:
You can give a name or label to the ONT that can be used to indicate
its location or how it is being used.
The Serial Number and PON AID are automatically populated.
Manual Pre-Configuration
The ONT can be pre-configured via the AddONT option of the EMS.
