manualshive.com logo in svg

Tellabs 6325, Hardware Installation Manual, Page: 46 / 80

Share
Download
Tellabs 6325 Hardware Installation Manual Download Page 46

46

MA365 • Rev. A2

Tellabs

®

 6325 Edge Node

3  Reference Information

LED on PS-DC module

The figure below shows the location of the LED on the front of the PS-DC
module.

The functions of the LED are described in the table below.

LEDs and switch on 
traffic modules

The figure below shows the location of the LEDs and switch on the front of the
traffic modules.

The functions of the LEDs and switch are described in the table below.

LED

Indication

Description

Active / 
Stand By

Off

• Module is not providing power (ei-

ther the input power is missing or 
the module has a defect)

• Module is in stand by mode (when 

the CMCC module is not installed)

Constantly green Module is active

Slow Flashing 
(0.5Hz) green

Module is in stand by mode

LED/Switch

Indication

Description

Remove

-

Switch to be activated before the mod-
ule is removed from the subrack.

Safe Removal

Yellow

LED indicating that it is safe to remove 
the module from the subrack.

Active / 
Stand By
(not on PIM1)

Off

• Module is not powered

• Module is in stand by mode (when 

the CMCC module is not installed)

Constantly green Module is active

Slow Flashing 
(0.5Hz) green

Module is in stand by mode

Summary of Contents for 6325

















































































Reviews:

No comments