2
DEVICE WIRING:
The
Compact GSM II
has 2 contact inputs and 2 relay outputs, which you can
configure in the programming software for the task at hand.
Attention! Do NOT connect the connector of the antenna or the terminals
of the device directly or indirectly to the protective ground, because this
may damage the device!
Inputs:
The device accepts
NO
or
NC
dry (potential free) contacts on its contact inputs.
The contacts should be connected between the chosen input
IN1
or
IN2
and the
power input minus (”
-
”) terminal. The input type can be configured in the
programming software.
TELL easyTEMP Compact temperature sensor:
The optional temperature sensor should be connected to input
IN1
.
Outputs:
The
REL1
and
REL2
outputs provide a normally open
(NO)
dry relay contact as
the default state, and a closed contact when activated. The outputs support
a load of max.
1A@24V AC/DC
.
