5.
Calling Line Identification (IdentiCall subscription
required)
The calling line identification display shows the origin of incoming calls.
If the data is available, the display shows the caller’s telephone number
after the first ring. If the caller’s name and number is stored in your
phonebook, then they will be shown alternately on the display. If the
caller has blocked the sending of his number or if the number cannot be
displayed for technical reasons, the messages
WITHHELD
and
UNAVAILABLE
will appear on the display. The calling numbers are stored in a list so
that you can return missed calls easily. A total of 30 calling numbers can
be stored in the list. Once the list is full, the oldest number is
automatically deleted each time a new call is received.
If new calls have been added to the list during your absence, a blinking
symbol appears on the display.
NOTICE:
A subscription is required to use the IdentiCall services.
Please call 10219 to subscribe to this service.
16
5.1
The list of callers
In order to see the list of callers on the display, proceed as follows:
1.
Press the
q
button to show the last calling number
received on the display. If no new calls have been received,
the display will show
EMPTY
.
NOTICE:
If the number matches a phonebook entry, then it is replaced
by the corresponding name in the phonebook.
2.
Use the
p
button to search upwards through the list. Use
the
q
button to move down the list in the opposite
direction. If there are no further numbers in the list you
will hear a beep.
The following symbols shows whether the entry in the callers
caller list has been called back or not.
- The caller number has not yet seen.
- The caller number has already been seen.
