Network Address
Translation
This option is available if you select
Routing
in the
Mode
field.
Select
None
,
SUA Only
or
Full Feature
from the drop-sown list box. Refer to the NAT
chapter for more details.
Back
Click
Back
to go back to the first wizard screen.
Next
Click
Next
to continue to the next wizard screen.
3.11 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients
to obtain TCP/IP configuration at start-up from a server. You can configure the TELKOM ADSL
5100 as a DHCP server or disable it. When configured as a server, the TELKOM ADSL 5100
provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have
another DHCP server on your LAN, or else the computer must be manually configured.
3.11.1 IP Pool Setup
The TELKOM ADSL 5100 is pre-configured with a pool of 100 IP addresses starting from
10.0.0.100 to 10.0.0.200 for the client machines.
3.12 Wizard Setup Configuration: Third Screen
Verify the settings in the screen shown next. To change the LAN information on the TELKOM
ADSL 5100, click Change LAN Configurations. Otherwise click Save Settings to save the
configuration and skip to section 3.13.
22
