Telmoss
user’s guide
33/42
2004. Telital mobitel d.o.o. All right reserved.
On-line menu
Live images
After the user has been logged in to the server, entering correct PIN, main window
content is changed:
Figure 27
In order to receive an image from a camera, follow the procedure:
•
On
Main function bar
select
“Live” picture
icon
•
Set
Image parameters
•
Press
the camera
icon from which the image will be captured
•
Observe the
Transfer progress bar
. When it reaches right-end position
image is drawn on the screen and the transfer of next image begins.
main function
bar
image
parameter box
camera selection
buttons
transfer
progress bar
Telmoss
user’s guide
34/42
2004. Telital mobitel d.o.o. All right reserved.
•
Swapping between cameras can be performed simply by pressing proper
Camera icon (only cameras marked with green icon are available)
Single image transfer’s time depends on the connection speed and preset Image
Parameters.
Since the original image captured by Telmoss is in resolution 640x480 pixels, the zoom
of 4x or 2x can be obtained if selected size for receiving images is set to 160x120 or
320x240 respectively. When image transfer is stopped (pressing again the appropriate
camera button, when it goes in up position) following icons become enabled:
Pressing the particular zoom level, user can select the area of interest inside the entire
image (yellow rectangle):
Figure 28
Once the area is defined, pressing the appropriate camera button again, starts the
transfer of selected region in full format.
NOTE
All received images are automatically stored to the computer’s disk drive in
the folder predefined in
Options/Picture folder
function AND if
Options/Save
Pictures
property is turned on (checked).