7 of 23
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
2
General Description
2.1
ME910C1 Main Features
The ME910C1 is the Category M1/NB1 evolution of the Telit LE910 Series of LTE modules. Specified
in the approved Release 13 of the 3GPP standard, Cat M1/NB1 devices are specifically tailored for
IoT applications, offering optimized power consumption and enhanced coverage. This model further
enriches the widely deployed Telit xE910 family of 28 x 28 mm LGA modulesBasic Set Up
•
LTE UE Category M1/NB1 3GPP release 13 compliant
•
Half Duplex FDD
•
Single Rx, single antenna
•
3GPP Rel. 12 Power Saving Mode (PSM)
•
3GPP Rel. 13 Extended Discontinuous Reception (eDRX)
•
3GPP Rel. 13 Extended coverage
•
Control via AT commands according to 3GPP TS27.005, 27.007 and customized AT
commands
•
SIM application Tool Kit 3GPP TS 51.01
•
SMS
•
IPv4/IPv6 stack with TCP and UDP protocol
•
OMA Lightweight M2M (LWM2M)
•
Over-the-Air firmware update (for future release)
•
Telit Application Development Environment: AppZone C (for future release)
•
SSL
•
Optional embedded GNSS (GPS, GLONASS, Beidou, Galileo)
