12 of 23
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
4.2
Network selection
AT#WS46 is the command that allows to set access technology on the module. Description
of the command here below:
AT#WS46=<n> set command selects the IoT technology to operate with.
Parameter:
<n> - integer type, it is the technology to be used:
0 – CAT-M1
1 – NB-IoT
2 – CAT-M1 and NB-IoT
The parameter is stored in NVM and the settings is available at next reboot.
If AT#WS46=2 (CAT M1 and NB IoT) the module starts to search for CAT M1 networks first,
if it doesn't find any it starts searching for NB IoT networks.
