background image

GS2011M Low Power Wi-Fi Module Hardware User Guide

1VV0301482 Rev. 5.0

Page 

16

 

of

 

69

2018-01-10

Accessing the GainSpan Portal

To find the latest version of GainSpan documentation supporting the GainSpan product 
release you are interested in, you can search the GainSpan Portal website by performing the 
following steps:

1. Visit 

http://www.telit.com

, go to 

Products> Wi-Fi and Blue-tooth

, then scroll down 

the 

Telit Wi- Fi Portal

.

2. Click 

Access the Portal Here

 icon which will direct you to the GainSpan portal 

http://www.gainspan/secure/login.com

3. Log in using your customer 

Email

 and 

Password

.

4. Click the 

Getting Started

 tab to view a Quick Start tutorial on how to use various 

features within the GainSpan Portal.

5. Click the 

Agreements 

tab to download and upload the SLA for ADK and SDK 

respectively.

6. Click on the 

Documents

 tab to search, download, and print GainSpan product 

documentation.

7. Click the 

Software 

tab to search and download the latest software versions.

8. Click the 

Kits Purchased

 tab to view customer account history.

9. Click the 

Legal Documents

 tab to view GainSpan Non-Disclosure Agreement 

(NDA).

10. Click the 

Certifications 

tab to view GainSpan certifications.

Ordering Information

To order GainSpan’s GS2011Mxx low power module contact a GainSpan Sales/Distributor 
Representative. 

Table 6, page 16

 lists the GainSpan device information.

NOTE:  

You must first contact GainSpan to set up an account, and obtain a 

customer user name and password before you can access the GainSpan Portal.

Table 6   GS2011Mxx Ordering Information

Device Description

Ordering Number

Revision

Low power module with on-board antenna GS2011MIZ

3.3

Low power module with external antenna

GS2011MIE

3.3

Summary of Contents for GainSpan GS2011M






































































Reviews: