Assembly And Maintenance Manual for Telink BLE 1x6 Test System 3.2
AN-18071200-E1
14
Ver 1.0.0
2.3.2
Test sites on Display board
As shown in Figure 15, the bottom side of the Display board contains six
independent test sites (marked as Site5~Site0 from left to right).
Figure 15 Bottom silk-screen of Display board
Each site (e.g. Site0 in Figure 16) on the Display board contains a mistake-proof
connector (marked as B) featured with dual rows, 2.54mm spacing and 2x12pin.
In Figure 16, Site0 is taken as an example to show the mark of connection points
on each test site of the Display board. G, W, R, Y and Button indicate connection
point Green-LED, White-LED, Red-LED, Yellow-LED, independent start button,
respectively.
Figure 16 Connection points on test site of Display board
G
W
R
Y
Button
GND
Telink
for
customer
