6
USING A LONGER MICROPHONE TYPE
(OMNI MICS ONLY!)
FORWARD
1.
Please mount complete dish as picture page 3. Please leave the foam
inside the Rycote Telinga OEM basket after removing the front cap. (Do
not remove the foam.)
2.
Remove the
black cylinder shaped Neoprene cable holder
out of the
GRAY TUBE
of the handle. Remember: dish should be attached already!
3.
Please attach your cable to your microphone and insert the microphone
from the back of the dish
thru the gray tube -> into the foam of the
basket
. Please see above photo: you should be able to see your
microphone capsule thru the foam center hole.
4.
DISH FOCUS:
On top of the basket you can find a silver sticker
focus
indicator
. Place your microphone capsule close to the focus indicator
inside the center hole of the foam. You can change position easily simply
by pushing the microphone inwards or outwards. It is not critical where
your microphone is placed as long as it is close (+/- 10 mm) to the focus
of the dish, you can experiment until you find a “sound” you prefer.
AFTER INSERTING YOUR MIC LET THE FOAM ADJUST TO THE SIZE OF THE MIC
aprx 5-10 seconds before recording .
That also applies if changing microphone
position inside the foam.
