4
The Telinga Modular includes:
1)
Handle
incl. mounting kit (gray tube, black ring
,
gray ring) already
mounted in handle & black NEOPRENE cable holder cylinder (removable)
found in the gray tube.
2)
22” Telinga Modular Parabolic Dish
to be placed in the mounting kit, in-
between the black ring and gray ring. The gray ring with thread should
always be secured
INSIDE the dish
while the black ring without thread
supports the dish from BEHIND. Please see above picture.
3)
Rycote Telinga OEM Basket with the “MONO” foam suspension
the
foam holds your mic/sensor while you can place your cable in the sliced
cable lane of the foam, when using a cardioid or omni microphone facing
the dish.
16.04.2021 (BETA)-STEREO FOAM ALSO INCLUDED
.
Please
contact us for installation instructions: [email protected]
4)
Rycote Telinga Windjammer (“fake fur”)
to be placed over the basket in
windy conditions.
5)
NEOPRENE CABLE HOLDER (black cylinder)
comes preattached in the
gray tube (removable) We recommend using the neoprene cable holder
with sliced cable channel whenever possible (microphone not too long).
If your microphone is too long to attach the neoprene cable holder,
and
you use a cable coming directly out of the gray tube remember you will
need to hold your cable around the handle or secure it (with temporary
cable ties for example) or cable noise might appear. Please see page. 7.
Using the Telinga Modular with your
microphone/sensor/cable (GETTING STARTED!)
(
A)
Please begin with removing the gray front cap of the Rycote Telinga
OEM Basket.
Then mount the complete dish as above picture
(PAGE 3)
the 22” dish should be attached before inserting microphone/sensors.
(B)
If you wish to use a microphone or sensor with its capsule
facing the
dish
(all cardioid mics!)
please take out the removable black foam which
sits inside the basket
. If you want to use your omni microphone or sensor
forward, please leave the black foam inside the basket.
PLEASE SEE PHOTOS BELOW (PAGE 5 & 6)
