7
5.
If using a microphone that is too long to use the included black Neopren
cylinder cable holder (found in the tube)
please remove it
- so the cable
instead can come out of the gray tube (as above photo).
IN THIS CONFIGURATION IT IS IMPORTANT TO HOLD YOUR CABLE AROUND
THE HANDLE WHILE RECORDING
or fasten it around the handle with cable ties
(that you can easily remove at a later stage.)
A cable that is moving around by itself – not held – or that cannot be placed in
the Neopren cable holder while using the dish often create a handling noise
sound that is similar to touching the foam of the basket while recording. Most
often this handling noise is caused by the cable itself as it twists slightly when
moving, especially with thicker cables.
If you are still experiencing handling noise from your cable, please remove the
cable and mic. Connect cable and mic (ONLY)
without the Telinga Modular
- to
your recorder. Hold your microphone with one hand and move the cable with
the other to find out if your cable or mic needs to be replaced.
