Telindus 1031, User And Reference Manual

Page: 172 / 394

Telindus 1031 Router Chapter 9
User manual Configuration examples
162
9.3 LAN extension over an ATM network
In this example, a remote office is connected to a central office over an ATM network.
A modem link connects the remote office to the ATM network. At the local office a Telindus 1031 Router
is installed. The central router is a third party router.
The configuration of the Telindus 1031 Router in CLI format is as follows:
Router
(+ modem)
modem
IP subnet 192.168.47.0
mask 255.255.255.0
network
LAN interface:
IP = 192.168.47.254 LAN interface:
IP = 192.168.48.254
IP subnet 192.168.48.0
mask 255.255.255.0
WAN interface:
IP = 192.168.100.1
mask = 255.255.255.252 WAN interface:
IP = 192.168.100.2
mask = 255.255.255.252
VPI 100
VCI 100
action "Load Default Configuration"
SET
{
SELECT lanInterface
{
LIST
{
ip =
{
address = 192.168.47.254
}
mode = routing
}
}
SELECT g703[1]
{
SELECT channel[g703_1]
{
LIST
{
encapsulation = atm
}
SELECT atm
{
LIST
{
pvcTable =
{
[a] =
{
name = pvc1
ip =
{
address = 192.168.100.1
netmask = 255.255.255.252
remote = 192.168.100.2
} atm =
{
vpi = 100
vci = 100
}
}
}
}
}
}
}
SELECT router
{
LIST
{
routingTable =
{
[a] =
{
network = 192.168.48.0
gateway = 192.168.100.2
}
}
}
}
}
action "Activate Configuration"