16
17
Setting the Auto On/Off function
During certain hours of the day you may
not want to be paged, and at the same
time want to save battery life.
• Press the FUNCTION/SELECT button
to display the function menu.
• Press the left directional button
to
move the cursor to the AUTO ON/OFF
icon .
• Press the FUNCTION/SELECT button
to display the Auto On/Off screen.
When the screen first appears, the
cursor will be at the left-most position.
This icon defines the Auto On/Off
status: either Auto On/Off Enabled ,
or Disabled .
• Press the left directional button
to
toggle the status.
• Press the right directional button
to
move the cursor to the hour field. The
auto ON time is shown on the left and
the auto OFF time is shown on the
right.
• Repeat the process for each field for
both the ON time and the OFF time
(hour, minute, and AM/PM if your
pager is set to display time in the 12
hour mode).
• Press the FUNCTION/SELECT button
to activate the Auto On/Off function.
The Auto On/Off indicator appears on
the display if the Auto On/Off function
has been enabled.
If the ON time is equal to the OFF time, the pager will
not enable the auto On/Off function.
NOTE: To escape without making any
changes, press the READ/RESET button
.
