14
15
Setting the Alert Pattern
• Press the FUNCTION/SELECT button
to display the function menu.
• Press the left directional button
to
move the cursor to the alert icon.
• Press the FUNCTION/SELECT button
to display the ”SET ALERT” screen.
The selected alert number flashes
• Move to the desired alert and press the
FUNCTION/ SELECT button to
initiate the alert change. A 2 second
sample of the selected alert plays
through the internal speaker.
Setting the Alarm
If you wish to set the alarm:
• Press the FUNCTION/SELECT button
to display the function menu.
• Press the left directional button
to
move the cursor to the alarm icon.
• Press the FUNCTION/SELECT button
to display the set alarm screen.
• When the screen first appears, the
cursor will be at the left-most position.
This icon defines the alarm status:
either alarm enable
, or alarm
disable . Press the left directional
button
to toggle the alarm status.
• Press the right directional button
to
move the cursor to the hour field. The
left directional button
increments
the flashing digits.
• Repeat the process for each field (hour,
minute).
• Press the FUNCTlON/SELECT button
to make the change.
The alarm indicator appears in the
lower right corner of the display if an
alarm has been set. At the selected time,
your pager either vibrates or emits a
unique 8-second alert, depending on the
alert mode.
NOTE: To escape without making any
changes, press the READ/RESET
button
.
