8
9
RECEIVING AND READING
YOUR MESSAGES
When receiving a message, your pager
alerts and displays the incoming message
symbol for approx. ten seconds. Then a
flashing ON symbol indicates that there
is an unread message.
• Press any button to stop the alert.
A flashing ON symbol indicates a
message has been received, but not read.
Your pager beeps at predetermined inter-
vals to remind you of an unread message.
• Press the READ/RESET button
to
display your message.
If more than one message exists in your
pager’s memory, press the left
or
right
directional arrow buttons to
select the message you wish to read.
The reversed arrow cursor indicates
the location of your message in
memory.
• Alt. 1, Numerik: Press
once again to
see the time and date it was received.
Alt. 2, Text
: The flashing arrow at the
bottom right corner of the screen
indicates the message you received
continues beyond the first two lines of
the display. Each
press advances
the message to the next two lines. Press
and hold the READ/RESET
button
to rapidly scroll through your message.
Finally the time and date it was re-
ceived are displayed.
BACKLIGHTING
To view your display in low light
conditions, turn on your pager’s backlight
by pressing and holding the FUNCTION/
SELECT button for 1.5 seconds.
If no further buttons are pressed, the
backlight automatically turns off when
the display goes blank. You can also turn
off the backlight by pressing and holding
the FUNCTION/SELECT button for 1.5
seconds.
