USER GUIDE
INTEGRATED HUMAN BODY TEMPERATURE SCREENING SYSTEM
V
IR
ALERT
3
The following outputs are available from VIRALERT 3:
• The Watchdog Timer is a signal which is transmitted at a user-defined interval
to check that the system is functioning correctly. The loss of the Watchdog
Timer could indicate a problem with the system.
• The Alarm signal is active whenever the alarm temperature threshold is
triggered within VIRALERT 3.
• The MaxTemp signal sends the maximum temperature value registered within
the detection area. This is the same temperature as that which can be displayed
at the top of the screen in VIRALERT 3.
To configure a data pair:
1)
Select the required output from the Available Data Sources table (for
example “Alarm”).
2) The list of Available Inputs/Outputs is expanded to show the corresponding
available Digital Outputs that can be paired to the highlighted data source.
3) Click on the required output to highlight it e.g. E1214-1 D0 0.
The details of the
New Pairing
will be displayed.
4)
Check that this pairing is correct, then press the
Add Pair
button.
The new pairing is added to the Existing Pairings list.
5) When you have configured the pairings, click
OK
.
5.5 Changing the Password
Each time you access the
Settings
menu, you will be asked for the Password. Enter
the default password, which is
0000
(i.e. four zeros).
You can change the Password via an option in the
Settings
menu.
1)
From the
Settings
menu, select
Change Password
.
The
Change Password
screen is displayed, as shown in Fig. 5-12.
Fig. 5-12 Change Password screen
2)
Enter the
New Password
and repeat it exactly the same in the
Confirm Password
text box.
3) Click
OK
to save the new password, or click
Cancel
to close it without saving
your changes.
24
