USER GUIDE
INTEGRATED HUMAN BODY TEMPERATURE SCREENING SYSTEM
V
IR
ALERT
3
5.4 Communication
NOTE:
You should only access the Communications menu if you are familiar with the
process of setting up IO Modules and/or creating Data Pairs via Modbus.
The Communication menu contains two options:
•
Modules
- this screen allows you to configure IO Modules to work with your
VIRALERT 3 system.
•
Pairs
- this screen provides an interface for creating Modbus data pairs.
5.4.1 Modules
The I/O modules supported by VIRALERT are listed below:
• MOXA ioLogik E1214 - 6 relay outputs
• MOXA ioLogik E1241 - 4 analog outputs (0 to 10 V or 4 to 20 mA via software
configuration)
• EL4014 - 4 analog outputs (0 to 20 mA or 4 to 20 mA via software
configuration)
• EL2624 - 4 relay outputs
A total of 16 modules, comprising any combination of the above modules can
be added. For more information on the MOXA ioLogik modules, refer to the user
documentation supplied with each MOXA unit.
5.4.2 Adding I/O Modules
1)
From the
Settings
menu, select
Communication
then
Modules
.
Any modules detected on your system will be displayed on the left-hand
column of the
IO Modules
screen, as shown in Fig. 5-10.
Fig. 5-10 Typical IO Modules screen
22
