Copying With X-Gen
Before you perform any copying task with your X-Gen, follow the steps
described below in
Set Up the X-Gen for Copying
.
Setting Up the X-Gen for Copying
Use this procedure to prepare the X-Gen system for copying in Manual
mode, Automatic mode, or for any specialized copying tasks.
1.
Switch the X-Gen modules on.
2.
If you purchased an XL or Ferrite Stereo Model and will be copying
with chromium dioxide (CrO2) tape, refer to table on page 6.
3.
Insert the cassette you wish to copy from into the Master well as
shown in Figure 1.
CAUTION
Never run your master (original) cassette in any of the
X-Gen’s
Cop
y wells or the recorded information will be lost.
4.
Insert the cassettes you wish to copy onto in the
Copy
wells of the
Control module and Copy modules.
8
Figure 1. Cassette Insertion
