NOTE:
If you have an external powered speaker system plugged into
the
OUTPUT AUDIO
jack, turn it on and adjust the volume of that
external system. (The level at the
OUTPUT AUDIO
jack is controlled by
VOLUME
.)
10. Turn on and play the connected VCR, LaserDisc player, etc. (P170v
model only.)
11. Press
SOURCE
on the P170/P170v keypanel to select one of the com-
puter inputs, as indicated by the SOURCE LEDs shown in Figure 12.
(Only the P170v can also select from two composite video and one
S-VHS source.)
12. To further enhance or change the image on the MagnaByte
®
P170/P170v, refer to the Keypanel and Menu Mode On-Screen Con-
trol sections of this manual.
NOTE:
Five seconds after you make a change, the image enhancements
that you have made will be saved. These saved enhancements will be
used as the default settings the next time that you activate your
P170/P170v.
13. When you are not projecting an image, press
LAMP
to turn off the
projection lamp.
14. After the MagnaByte
®
P170/P170v has cooled, turn it off.
NOTE:
To use your computer and monitor without disconnecting them
from the P170/P170v, the P170/P170v must be plugged into an AC wall
outlet and turned on. The
OUTPUT MONITOR
jack on the MagnaByte
®
P170/P170v requires power to operate the computer monitor.
NOTE
: The projector lamp does not need to be on to use the OUTPUT
MONITOR jack.
☞
☞
☞
☞
User Manual 15
