4.
Adjust the room lighting for optimum screen viewing. (The projec-
tor lamp is automatically turned on when the P170/P170v is turned
on.) You may press the
LAMP
button to turn off the projector lamp
until your presentation begins.
5.
Adjust the screen focus by rotating the lens (Figure 13).
6.
To adjust the vertical position of the image on the viewing screen:
a.
Lift the front of the projector.
b.
Press the foot release bar shown in Figure 13.
c.
Raise or lower the projector as desired, then release the bar.
NOTE:
The keypanel and on-screen control settings will be the same as
they were when the P170/P170v was last used, if five seconds were
allowed to elapse before the P170/P170v was turned off.
7.
To improve the imgage phase adjustment, display a colorful image
on the computer screen and select the on-screen FOCUS control. (It
is easier to adjust the MagnaByte
®
P170/P170v with a colorful im-
age.)
8.
Turn on your audio source (CD player, wireless microphone,
amplifier auxiliary audio output, etc.).
9.
Press
VOLUME
to adjust the volume of the P170/P170v built-in
speakers.
☞
MagnaByte P170
TELEX
Sliding Lens Cover Door
Focus Adjustment
Remote Control Sensor
Foot Release Bar
Figure 13.
Height and Focus
Adjustments
14 User Manual
