Telex KP-812, User Manual

Page: 51 / 106

51
KP-812 Keypanels User Manual
Removing an Input Assignment
1. Select GPIO , then tap the encoder knob.
2. Turn the encoder knob to scroll to Input .
3. Tap the encoder knob to select Input .
4. Turn the encoder knob to display the GPI input you want to remove.
5. Tap the encoder knob to select the GPI input .
6. Turn the encoder knob until Not Asgnd appears.
7. Tap the encoder knob to select Not Asgnd .
¡
Not Asgnd displays. The arrow indicates that “Not Assigned” is the new selection.
8. Press the encoder knob for 1 second to exit.
9. Run Service Menu, Save Cfg to store local GPIO settings.
Adding or Removing a GPI Ouput Key Assignment
1. Select Local GPIO , then tap the encoder knob.
Input displays.
2. Turn the encoder knob until Output appears.
3. Tap the encoder knob to select Output .
GPI Out #1 displays.
4. Turn the encoder knob to display a different GPI Output.
5. Tap the encoder knob to select a GPI output .
Tap Key displays.
Note : If there is a key currently assigned to activate the selected GPI output, both LEDs for
that key will be lit red. If there is no assignment, no LEDs will be lit red.
6. Tap an intercom button or user assignable key to add or remove the GPI output
assignment.
7. Press the encoder knob for 1 second to exit or tap the encoder knob twice to back
up and make more assignments.
8. Run Service Menu, Save Cfg to store local GPIO settings.