Telex KP-812, User Manual

Page: 40 / 106

40 KP-812 Keypanels User Manual
5. When the requested list is displayed, turn the encoder knob to scroll through to the
desired assignment.
6. Once you come to the desired list, tap the encoder to select it.
Talk Lvl 1 should now display in the Call waiting window.
7. Turn the encoder knob if necessary to select a different option.
Options are as follows:
Talk Lvl 1: Assigns only talk level 1. Leaves the listen assignment as is
Listen: Assigns only listen. Leaves the talk assignment as is
Talk + AF: Assigns talk level 1, with auto-follow listen
Talk + AL: Assigns talk level 1, with auto-listen
Talk + AM: Assigns talk level 1, with auto-mute listen.
Talk + AR: Assigns talk level 1, with auto-reciprocal listen
Talk + AT:
Assigns talk + auto-table.
Talk Lvl 2: Assigns talk level 2
•
If you attempt to assign talk level 2 to a key and there is no talk level 1 assignment,
the assignment will go on talk level 1.
•
If you change the talk level 1 assignment for a key that also has a talk level 2
assignment, the talk level 2 assignment will be erased.
8. Once you have selected an option, tap the encoder knob.
Tap Key should now display
9. Tap an available keypanel key. The top button is for listen and the bottom button is for
talk.
•
If you assign any type of talk key, the assignment name will appear in the
alphanumeric display above the key.
•
If you add a listen assignment to an existing talk assignment, the listen assignment
will appear briefly in the alphanumeric display to confirm the assignment. Then, the
talk assignment will reappear.
•
If you assign a key that is listen only, the assignment name will appear briefly in
uppercase letters, then will change to lowercase letters.
This completes the key assignment procedure. Refer to any notes below regarding the
various key assignment types.
Note : When reassigning keys remember to remove any Chime, Solo, or Key Group options
if they will not be needed for the new key assignments.
Key Assign, Pt-to-Pt
Assigns a key that talks or listens to another intercom port. Note, some pt-to-pt destinations
may be non-keypanel devices that cannot activate talk and listen paths. Therefore, if you
want full communications, you may need to assign both talk and listen on the key.