7
Switch
Number
Description
Settings
Default
Setting
DIP Switch SW1 (Internal)
SW1-1
Headset microphone type
On: Unbalanced
Off: Balanced (Typical)
Off
SW1-2
Call signal send, channel 1
On: Enabled
Off: Disabled
On
SW1-3
Call signal receive, channel 1
On: Enabled
Off: Disabled
On
SW1-4
Call signal send, channel 2
On: Enabled
Off: Disabled
On
SW1-5
Call signal receive, channel 2
On: Enabled
Off: Disabled
On
SW1-6
Mic kill signal send
On: Enabled
Off: Disabled
Off
SW1-7
Program 2 interrupt
On: Interrupt during talk
Off: No Interrupt
Off
SW1-8
Program 1 Interrupt
On: Interrupt during talk
Off: No Interrupt
Off
Push-button Switch SW2 (BAL-UNBAL Switch on Back Panel)
Audiocom or Clear-Com
operation
Out: Audiocom (Balanced)
In: Clear-Com (Unbalanced)
Out
DIP Switch SW3 (Internal)
SW3-1
Incoming call beep, headset
On: Disabled
Off: Enabled
Off
SW3-2*
Listen 1 to speaker 1 only
On: Enabled (Binaural)
Off: Disabled (Monaural)
Off
SW3-3
Incoming call beep, speaker 1
On: Enabled (SW3-1 must be off)
Off: Disabled
Off
SW3-4
Incoming call beep, speaker 2
On: Enabled (SW3-1 must be off)
Off: Disabled
Off
SW3-5*
Listen 2 to right headphone
On: Enabled (Monaural)
Off: Disabled (Binaural)
On
SW3-6*
Listen 2 to speaker 2
On: Enabled (Binaural)
Off: Disabled (Monaural)
Off
SW3-7*
Listen 2 to speaker 1
On: Enabled (Monaural)
Off: Disabled (Binaural)
On
SW3-8*
Listen 1 to left headphone
On: Enabled (Monaural)
Off: Disabled (Binaural)
On
* Set all to monaural or all to binaural. Do not mix settings.
Table 1. Configuration Switch Settings
