2 5
US2000A
CH 1-2
XP-USPG
PA
OUT
PGM
1 IN
PGM
2 IN
BACK
FRONT
9
10
9
7
8
Figure 14. External Audio Input and PA Output. You can connect two audio
sources to the Program Inputs connector: one for each channel. Audio sources can
be directly connected with a user-supplied DB9M connector. (Refer to the program
input connector specifications, located on page
, for connector pin-out.) However,
a more convenient method is to use an XP-USPG Breakout Panel as shown. The
XP-USPG lets you use standard, 3-pin XLR audio cables to connect audio sources.
The XP-USPG also interfaces the PA jack of the US2000A to a standard, 3-pin
XLR audio cable. Note: The XP-USPG Breakout Panel can be rack mounted using
a BOP-1000 Rack Mount Plate.
Note: For further infor-
mation about the cable
numbers, see page
