25
11.
NAT disable:
You can disable NAT feature if required.
12.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV stream) to
pass-through this device.
F. PPTP
1.
WAN Type:
Choose PPTP.
2.
IP Mode
: You can select “Static IP Address” or “Dynamic IP Address”.
3.
My IP Address*
,
My Subnet Mask*, and Gateway IP*
: The IP address, subnet mask,
and IP address of gateway your ISP assigned to you.
4.
Server IP Address/Name
: The IP address of the PPTP server.
5.
PPTP Account
and
Password
: The account and password your ISP assigned to you.
6.
Connection ID
: Optional. Input the connection ID if your ISP requires it.
7.
Connection Control:
There are 3 options to start connection:
Auto Reconnect (Always-on): The device will always try to link to Internet.
Connect-on-demand: The device won’t try to connect to Internet until LAN PCs or
devices try to go to Internet. Once Internet connection is established, this device
will drop the connection if maximum idle time is reached.
Manually: The device won’t try to connect to Internet until users press “connect”
button at Status page. Once Internet connection is established, this device will
drop the connection if maximum idle time is reached.
8.
Maximum Idle Time
: the time of no activity to disconnect your PPTP session. Set it to
zero or enable “Auto-reconnect” to disable this feature.
9.
Maximum Transmission Unit (MTU)
: Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
Summary of Contents for TW-EA515
