5. Operation
Operating the TeleCLIENT TC7020 includes using the
TeleCLIENT Connection
Manager
to set up network connections, and the hot key combinations to switch
between active sessions. This chapter explains how to use the
TeleCLIENT
Connection Manager
and operation hot keys.
It includes the following sections:
•
Powering On
•
Using the
TeleCLIENT Connection Manager
•
Connecting to a Network Server
•
Using the TeleCLIENT TC7020 Hot keys
•
Logging Off
5.1. Powering On
The TeleCLIENT TC7020 Windows-based terminal is powered by an AC to DC adapter,
which connects to the rear panel DC-in jack. Notice the
ON/OFF
switch located on the
front panel (refer to Hardware Installation). Use this switch to power the TeleCLIENT
TC7020 on and off.
To power-off the TeleCLIENT TC7020, press the ON/OFF switch. To re-start, press the
ON/OFF switch briefly.
WARNING:
FOLLOW THE INSTRUCTIONS ABOVE CAREFULLY TO AVOID
ACCIDENTAL POWER SHUT-OFF TO THE TELECLIENT TC7020.
5.2. Using the TeleCLIENT Connection Manager
The
TeleCLIENT Connection Manager
allows a user to create and manage
TeleCLIENT TC7020’s network connections. Whenever the TeleCLIENT TC7020 starts
up, the
TeleCLIENT Connection Manager
window automatically displays (
)
unless it is an initial start up or ‘
auto-start connection’
was set by a user. This window
will also appear whenever user logs off or disconnect from a session.
