Televic TCS5500, Installation Manual

Page: 42 / 125

Page | 34
Structure of the CPU5500 central unit’s operating
menu
The menu trees on the following pages can be used as a quick
reference guide when configuring the conference menu.
In the menu tree the following information is given for each menu
item:

The buttons that have to be used to get to the desired menu item

The setting(s) that can be adjusted

The buttons that have to used for adjusting the setting(s)

The buttons that have to used for saving the setting

The button that has to be used if you want to quit a menu item
without saving the setting(s)
Note that when a menu item is boxed in blue (and have a thick box
around it), this means that this menu item will not return
automatically to the main menu if no action is taken within a
certain time.
In the “Conference” menu all settings are saved with a
confirmation question. Only the delegate loudspeaker volume is an
exception
and will always be saved when changed.
In the “Interpretation” menu an explicit save must be performed
after
changing parameters through the menu
2.Interpretation/1.Configuration/4.Save Config. After confirmation,
all the interpreter desks will be restarted and take over the changed
parameters.
To be able to save the settings of the Aux-In/Out analog
input/output the user must first select a preset through menu 3.Aux-
In/Out/9.Preset/1.Select Preset. This step allows the user to load
some settings to start from. After changing Aux-In/Out settings
through the menus 3.Aux-In/Out/1..8 the user can save these
settings through menu 3.Aux-In/Out/9.Preset/1.Save Preset (only
the selected preset can be saved to prevent overwriting of other
presets).
In short: Conference parameters are saved one by one with a
confirmation question, Interpretation and Aux-In/Out parameters
must be saved by means of a “save” menu.