User instructions
“RSD - 7235”
49
ENGLISH
Note:
When the message “Unlocked” appears in the signal level, you must check the following points:
- Adjust the antenna’s position until the level changes to “Locked”
- Modify the transponder values.
The receiver also disposes of the manual “Set PID” option, although it
should know this data.
In general, this option does not need to be used as the receiver
automatically detects all the programmes contained in the transponder.
However, for some programmes that are transmitted in test mode, we
don’t dispose of the appropriate information.
In cases such as these, you can manually enter the PID’s of the desired
programme, so that this is recognised by the Receiver.
Each PID can be entered as a decimal value.
To confirm the data that has been entered, select the “OK” box and then
press the OK button.
The option “Delete TP” lets you erase the transponder data that is
selected in the menu.
When this option is selected, a message will appear asking us to confirm
if we want to erase the transponder (YES) or if we want to cancel the
command (NO).
TP
Setup
Check Signal
Start
Set PID
Delete TP
Satellite
ASTRA
Univ. LNB
YES
LNB Freq. 1
9750
LNB Freq. 2
10600
14/18 Volt
None
22KHz
None
DiSEqC
Port A
Antenna
1
Transponder
TP52
Frequency
12168
Symbol Rate
27500
Polarization
Ver
FEC
AUTO
22KHz
ON
Set PID
Video PID
0
Audio PID
0
PCR PID
0
OK
Cancel
