Televes OSSGT, Operating Instructions Manual

Page: 7 / 16

7
EN
3. Keyboard
The keyboard operation will depend on the current
working mode. See the table below:
Button Main functions
Swith On / Swithc Off the device (press and hold).
Change the view diplayed on the screen (X/Y).
Perform a test arc or re-arc.
Access menu, sub-menus and saves parameters.
Oven start-up.
Exit the menu and get the engines back to their
initial position.
Perform splicing (when fi bers are positioned).
Next.
Back.
More.
Less.
4. Start-up and menu description
To switch the fusion splicer on or off , press and hold the
key .
Once switched on, press to access the “Main Menu”.
Once there, the diff erent modes of the splicer will be
accessible.
Options Description
Function
Setting
Fast adjustments related with the use of the
device.
Splice Mode
Allows the selection of the fi ber type and the
work mode.
Heating Mode
Allows the selection of the heat-shrink
protector type.
History Records
Displays the splice date and the images
recorded.
Maintenace Menu for use-based maintenance.
Sistema
System confi guration: language, screen,
power, ...
4.1 Function Setting
In this option, the parameters shown below will be
confi gurable:
Parameter Description
Quick ARC
Calibration
Mode
With this option activated, a quick calibration
arc will be performed before the splicing
process begins.
Tension test
With this option activated, a tension test of 2N
will be performed after the splicing process
has ended to check the splice’s resistance.
Motor reset
waiting time
Waiting time for the engines to go back to
initial position once raised the cover after the
splicing process is completed.
Automatic
splice
With this option activated, the splicing process
will begin once the cover is closed, without the
help of any key.
Automatic
heating
With this option activated, the heating process
will begin once the cover is closed, without the
help of any key.
Force heat
With this option activated, the device will force
the heating process in case this one does not
begin.
Auto save splice
image
With this option activated, the images with the
results of the last 20 splices performed will be
automatically saved.