User´s Manual
Audio/Video Transmitter & Receiver
75
ENGLISH
1.-
Make sure the Receiver ON/OFF switch is in the OFF position.
2.-
Use the supplied leads to connect the A/V receiver outputs to the inputs of the rest of
the remote units receiving signals. Please be sure of matching colour connections.
3.-
Select the same channel for the receiver that you selected for the transmitter via the
switches that you can find on the back part of the unit. (see section "Selection of
channel and sampling time").
4.-
Plug one end of the provided power adapted into the back of the receiver and the
other end into any 230V~ wall outlet. Turn the ON/OFF switch to ON position. The
LED that corresponds to the previously selected channel will light up.
5.-
Next examples show how to connect up the receiver. Some of them might need
additional accessories.
RF IN
VIDEO 2 VIDEO 1
IN
To wall
outlet
230V~
A/V Cable
Cable TV Hookup
Signal from antenna
RECEIVER
TV
Connecting the Receiver
How to receive signals on remote equipments (receiver)
To a Remote TV
