Televantage H2O MOP X5 User Manual Download Page 7

USER’S GUIDE

20

USER’S GUIDE

6

KEY FEATURES

Front view

Back view

Curved Handle

Upper Cord Wrap

Power Supply Cord

Cord Holder

Curved Handle Lock Button

Extension Handle

Lower Cord Wrap

Extension Handle Lock Button

Power Switch ( O / I ) with LED ON/OFF Light

Steam Regulator

Water Tank Cap

Water Tank

Main Body

Lock Button (on Main Body)

Safety Pressure Release Valve

Mop Head

ACCESSORIES

Glider                     Microfiber Cloth              Measuring Cup         Cleaning Pin

225ml

150ml

100ml

50ml

Jet Nozzle                      Round Brush (Brass)        Round Brush (Nylon)        

USER’S GUIDE

29

1)

 Unplug Power Cord from outlet.

2)

 Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from 

  Mop Head, as cleaning cloth could still be hot.

3)

 Any water remaining in the Water Tank should be emptied prior to appliance    

  storage. Always empty the Water Tank at the end of each use.

4)

 Let any water (that may remain as a product of condensation) drain from the    

  steam opening prior to storing the appliance.

5) 

Wrap Power Cord around Upper and Lower Cord Wrap.

6)

 Wipe all surfaces of the H2O MOP X5™ with a soft cloth. Store in a protected,   

  dry area.

7)

 Please store the unit in a cool and dry place when not in use. Do not leave it    

  exposed to sunlight or rain.

8)

 Upright storage of the H2O MOP X5™ with a wet Mop Pad/Cloth may result    

  in the formation of white marks on your floor. To remove the white marks,
   clean area with vinegar. Make sure to remove the Mop Pad/Cloth before 
 storage.

AFTER USE

Summary of Contents for H2O MOP X5




















Reviews: