USER’S GUIDE
20
USER’S GUIDE
10. Do not use with damaged cord or plug. If the H2O MOP X5™ is not working
as it should, has been dropped, damaged, left outdoors, or immersed in
water, return it to the distributor. If the supply cord is damaged, it must be
replaced by the manufacturer or a qualified repair facility to avoid hazard.
11. Do not pull or carry the unit by the cord, use the cord as a handle, close a
door on the cord, or pull the cord around sharp edges or corners. Keep
the cord away from heated surfaces.
12. Never force the plug into an outlet.
13. Do not use extension cords or outlets with inadequate electrical current
carrying
capacity.
14. Unplug after each use. To safely unplug, grasp the plug and gently pull, do
not unplug by pulling on the cord.
15. Do not handle the plug or the H2O MOP X5™ with wet hands or operate
without shoes.
16. Do not insert any objects into openings in the unit. Do not use with any opening
blocked.
17. Do not use the Mop Head without floor cloth in place.
18. Do not use without water in the Water Tank.
19. Use extra caution when using on stairs.
20. Store your H2O MOP X5™ indoors in a cool, dry place.
21. Keep your work area well lit.
22. Never put hot water or any other liquids such as aromatic, alcohol-based, or
detergent products into the H2O MOP X5™ Water Tank. This will make the
operation unsafe and damage the unit.
23. Always keep the output for the steam clear. Avoid placing the steam
opening on soft surfaces which may block the flow of steam. Keep the
openings free from lint, hair and other potential obstructions to ensure
proper steam flow.
4
USER’S GUIDE
31
2)
Use the Cleaning Pin to remove scale deposits from the small hole of the steam
outlet in the Main Body, as illustrated in Fig. 2.
By swirling and pushing the pin up and down
you will clean the steam outlet. Always ensure
that all scale debris have been removed from
the steam outlet before reassembling.
Continue swirling Cleaning Pin until no further
debris is evident.
By using cleaning solution
1)
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2)
Secure and position the unit to ensure steam released is aimed away from the
floor or surrounding objects and surfaces. Plug the unit in, turn the unit ON by
pressing the Power Switch ( O / I ) and allow the unit to produce steam until the
vinegar/water solution is used up.
3)
Repeat the above procedure as many times as necessary until a normal steam
flow rate is achieved.
4)
Fill the Water Tank with fresh water and rinse out.
5)
Fill the Water Tank with fresh water, attach to the unit and release steam
through the system until the Water Tank is empty.
Do not leave the steamer unattended during the lime scale removal
process and/or while in use.
Perform a test cleaning on a suitable isolated area after each lime scale removal to
ensure that there is no debris left in the system.
DANGER OF SCALDING
!
NOTICE
!
WARNING
!
WARNING
2
