USER’S GUIDE
20
USER’S GUIDE
11
PLEASE READ BEFORE USE
The H2O MOP X5™ is designed to thoroughly clean floor surfaces, such as marble,
ceramic, carpet, stone, linoleum, and sealed hardwood floors and parquet. Not all
floor types are suitable for steam cleaning.
The heat and steam action my remove the wax on surfaces treated with wax. Do
not use on unsealed flooring or let unit stand on any wood or heat sensitive floor
for an extended period of time. This could cause the wood grain to rise, in
addition to other types of damage.
When using on vinyl, linoleum or any other heat sensitive floors, use extra caution.
Too much heat can melt glue in the flooring. Use only on laminated flooring that
has been laid professionally and without any gaps or cracks that would permit the
entry of moisture.
Test the H2O MOP X5™ on a small isolated area of your flooring prior to overall use
on any floor surface.
Always check the use and care instructions of your flooring manufacturer or
distributor before using the H2O MOP X5™.
When in doubt, please consult a flooring specialist. Only use the carpet glider
on carpeting and rugs. Use of the carpet glider on other floor surfaces will cause
streaking and possibly scratching.
This product emits steam and creates moisture. Water marks, discoloration
or damage to the floor surface can occur if the unit is left operating too
long in one place.
HOW TO USE THE H2O MOP
X5™
!
NOTICE
USER’S GUIDE
24
6)
When the Hand-Held Steamer stops emitting steam, simply turn off and unplug
the unit, refill the Water Tank and continue cleaning.
7)
Once you finish cleaning, allow the Coral Cloth to cool down and carefully
remove it from the Window Cleaning Tool, as cleaning cloth could still be hot.
• Do not use the steam to clean frozen windows.
• Be careful when using the steamer on glass, as it may break.
GARMENT STEAMER
Make sure that the H2O MOP X5™ is unplugged.
1)
Fill the Water Tank with water. Please refer to the “HOW TO USE THE H2O
MOP X5™” section in this manual
2)
Install the Garment Steamer Cloth onto the Window Cleaning/Garment
Steaming Tool and attach the Window Cleaning/Garment Steaming Tool to the
Extension Hose as described in the “How To Assemble the Optional Accessories”
section in this manual.
3)
Select one of the following Steam Regulator
positions: 1 – Low or 2 – Medium when using the Garment Steamer.
Do not use 3 – High and 4 - Hot Spray steam settings when using the
Garment Steamer.
You can change the Steam Regulator position and steam output while operating
the H2O MOP X5™.
4)
Follow Step 3 described in the “How To Use the Hand-Hand Steamer“
section in this manual.
!
NOTICE
