TELETRAC NAVMAN TM470 Series, Installation Overview

Page: 31 / 65

Power Connections continued
Constant power connection
•
The correct wire will have power regardless of key position. This connection should have power even if the key is removed from the ignition.
The red wire from the TM470 will be connected here.
Ignition power connection
•
The correct wire will have power when the key is in the on/run position and also while the engine is cranking. It will not have power with the
key off or removed. The pink wire from the TM470 will be connected here.
Caution must be taken if the vehicle has a main battery disconnect switch, if equipped the constant (red wire) connection should be made on the
battery side (hot at all times) unless the customer has advised they don’t want this.
31