IRIS/SIMPO Repeater TFT - Addressable Fire Alarm Repeater Panel
– Installation & Programming Manual
24
Sounder2 Open
Circuit broken at Sounder 2 output.
Fire Output Short
Short circuit detected at Fire output.
Fire Output Fault
Circuit broken at Fire output.
EXT Output Short
Short circuit detected at Extinguishing output.
EXT Output Fault
Circuit broken at Extinguishing output.
Fault Output Short
Short circuit detected at Fault output.
Fault Output Fault
Circuit broken at Fault output.
Fault Power AUX
Short circuit (the mains power supply is lost).
Alarm Confirm Input Short
Short circuit detected at input
“Alarm Confirmation”.
Alarm Confirm Input Open
Circuit broken at input
“Alarm Confirmation”.
Alarm Confirm Input On
“Alarm Confirmation” input activation.
Protection Alarm Confirm Short
Short circuit detected at input
“Protection Alarm Confirmation”.
Protection Alarm Confirm Open
Circuit broken at input
“Protection Alarm Confirmation”.
Protection Alarm Confirm On
“Protection Alarm Confirmation” input activation.
Fault Protection Panel Input Short Short circuit detected at input
“Protection Panel Fault”.
Fault Protection Panel Input Open Circuit broken at input
“Protection Panel Fault”.
Fault Protection Panel Input On
“Protection Panel Fault” input activation.
Protection Panel Fault
The extinguishing panel failure.
Loop Break
The loop is broken.
Loop Short
Short circuit detected in the loop.
New Loop Devices Found
New loop devices are found in system configuration (Loop 1 or Loop 2).
Loop Zero Address
There is a device without address number (a device with address 0 is applied).
Double Panel number
Doubling of the panel number (when two or more panels are connected in a
network).
Panel Fault
Fault in the connection with another panel (when two or more panels are
connected
in a network). The Network Status of a panel in the network is set to Disabled.
Reset
Resetting of the panel.
Silence Alarm
The sounders have been silenced.
Zone Disabled
The zone is disabled.
Earth Fault function DISABLED
The Earth Fault indication is disabled.
Sounder Disabled
The Sounders are disabled.
Fire Brigade Output Disabled
The fire output is disabled.
Fire Protection Output Disabled
The extinguishing output is disabled.
Fault Output Disabled
The fault output is disabled.
Zone In Test
The zone is in test mode.
Transmitting device active
The Fire output is activated.
Extinguishing output active
The Extinguishing output is activated.
Sirens active
The sounders are activated.
User log off
Exit from access level 2 (Maintenance).
Installer log off
Exit from access level 3 (Installer).
